Rocker da hannunsa. Teetering a kan perch da hannuwansu. Unhooked daidaita hannuwansu

Balancers da kyau sosai catchability, musamman na farko da kuma karshe kankara. A zamanin yau, za ka iya ganin su a cikin wata babbar tsari na kama kifi magance shagunan. Duk da haka, farashin for irin wannan kifi kaya, da muni. Kuma idan ka yi la'akari da cewa akwai a kowane masunci dole ne a kalla a dozin irin baits kamar yadda ta chunking da hooks ba zai iya tserewa, to, ba da gangan fara tunanin, da yadda za a yi wani rocker da hannayenku. Bari mu dubi wannan a more daki-daki.

Materials for da yi na balancers

Kamar yadda tushe kayan amfani softwood itacen (Linden ko Aspen). Maimakon haka, ana iya amfani da kuma wani m kumfa. Wannan wajibi ne don tsirar da preform (model) sikẽli mashaya.

Bugu da ƙari, ya yi da sikeli nauyi da hannuwansu, za bukatar wani karfe ko jan karfe waya na wani kauri daga rabin millimeter, solder tare da wani sosai low narkewa batu, gubar, wani kwalban sanya na roba tare da wani lokacin farin ciki (na shi za a yi reshe), multicolored Paints (dace aerosol jinsunan sauri) , hooks da tees na daban-daban masu girma dabam tare da dogon hannu da dantse, m PVA m plaster da sabulu da kuma graphite foda (madadin za a iya amfani sandpaper grated sanda taushi fensir).

A Paint kuma iya zama used acrylic da gouache. Bayan zanen bukatar ya rufe fentin yankin tare da m varnish.

Tools domin yin rocker

Production na auna da hannuwansu dole ne a yi amfani da wadannan kayan aikin:

• ostrozatochennogo wuka (wallpaper za a iya amfani da);
• filaya ko gefen masu saro.
• filaya.
• dalibi kurege goga tari.
• clamps.
• gwangwani na abincin gwangwani.
• soldering baƙin ƙarfe da damar da ɗaya da ɗari watts.
• orthophosphoric acid.
• katakai.
• sandpaper biyu lamba;
• Allura fayil sa.

Production preform balancer

Blank for qirqiren sikẽli kana bukatar ka yanka daga wani itace, ko a mai yawa kumfa, ba shi da ake so siffar. Sa'an nan kuma, tare da taimakon wani katako, mashaya da sandpaper sanya ta kammala ba da workpiece da ake bukata sigogi.

A na baya ɓangare na balance an yi thinner, girman wata biyu-bango kauri daga cikin roba kwalban. Wannan gwadawa ake bukata kawai a baya da kuma tarnaƙi na workpiece, kuma ta tsawon shi ne game da bakwai millimeters.

Finalization na workpiece

Da zarar workpiece ne shirya, shi ya kamata a saka a cikin shirye hooks (suka kawar da kunne) da kuma sanya su a kan PVA manne. Sa'an nan kuma ka bukatar ka gani sanin inda workpiece zai zama cibiyar da nauyi, da kuma yin wannan wuri da fensir mark.

Bayan da preform aka saka a cikin wani karfe ko jan karfe waya, wanda aka lankwasa a cikin wani baka (shi zai yi aiki a matsayin madaukai). Proper sakawa na shafuka ne mai sauqi ka duba - girbi aka dakatar da shi a kan waya. Idan madauki da aka ci da gumi a cikin kuskure wuri (a workpiece akwai wani karfi amfani a kowane shugabanci), sa'an nan an gyara up har da balancer ba zai rataya horizontally. A wannan yanayin, idan aka soldered ga reshe, wutsiya rabo zama mafi tsanani, kuma koto zai yi daidai matsayi na kamawa kifi.

Kamar yadda za a iya gani, da shiri lokaci, wadda ta ƙunshi a samar da billets, ba ma rikitarwa, kuma samun mai kyau aiki balancer domin kama kifi tare da hannuwanku ba da gaske wuya.

Samun kyawon tsayuwa balance: Asirin

Bayan karbar workpiece kanta fara Manufacturing kyawon tsayuwa. Babban abu a cikin wannan yanayin ne da yin amfani da m da kuma m ganga cewa za a iya amfani da a reusable. A da kyau zaži zai zama roba akwatin daga tawada alkalami.

Its babba part (murfi da kwalaye) ya fasa zuwa biyu daidai sassa. Ta haka, mun samu biyu trohstennye damar cewa za a iya amfani da dama sau (ostyvshaya form ja daga sauƙi sosai - kawai bukatar dan kadan tsarma gefe ganuwar da sakamakon filastik kwalaye).

Domin sauƙaƙe kau da siffan, kasa da kuma ganuwar smeared da ruwa da sabulu kwantena ga manufar hana mai danko plaster da akwatin.

Ana shirya wani farko mold rabin

Yadda za a yi rocker da hannayenku, don haka abin da ya kasance a wannan lokaci sturdy? Domin wannan nau'i ake amfani a cikin yi da filastar a admixture da PVA manne. Kafin ciko da blank form hankali lubricated tare da wani lokacin farin ciki sabulu bayani, wanda ya ba da lokaci ga bushewa. Sa'an nan kuma, daya rabin cika da alabaster kwalaye. Fakowa bango tare da pre-kulle a cikin wani m abu (yanki na fiberboard, roba ko gilashi farantin).

A sakamakon bayani da dama a kaikaice blank da guga man game da rabi. Nan da nan bayan haka, da Ya shiryar da suna guga man a cikin wani mold. Kamar yadda suka za a iya amfani da karfe washers, qazanta bukukuwa ko kananan tsabar kudin. A tsari kamata daskare da kyau, sa'an nan da mai kaifi wuka, cire duk bumps da kuma karin yadudduka da farar ƙasa.

Irin yadda ake gudanar da ake yi domin samun sauƙin cire fitar da preform daga mold. Its kau dole ne a yi sosai a hankali don kauce wa lalacewa. Bayan da preform aka ja daga mold, shi wajibi ne don yanke da wuka ƙofar da kujeru ga saki zafi gas. A farkon rabin mold ne gaba daya shirye. A dawowar shi wajibi ne don saka wani blank cover duk sabulu su hana mannewa ga shi na biyu mold rabin.

Shiri na karshe version na form

Bayan bushewa soaps hada farkon rabin mold a karo na biyu akwatin. Nuna biyu kwalaye ya zama haka cewa saman bango ya bace. Suna dan kadan matsa matsa. Cika wani biyu mold rabin tare da cakuda plaster da PVA manne, kula da cewa cikin bayani da aka zuba, da dukan sarari cika ba tare da samuwar voids da kumfa. Bayan curing cakuda biyu halves na mold aka koma baya da kuma cikakken rabu, wuka da kuma yanke da sprue risers. Sa'an nan, sakamakon siffar na biyu halves yadda ya kamata bushe. Kuma duk da haka, da ta shirya don cika da gubar. Kamar yadda ka gani, duk da ayyukan ne quite lokaci cinyewa, amma yana yiwuwa don samun mai kyau analogue sayi baits - rocker da hannunsa!

Jefo sikẽlin. a cikin zane tips

Domin samun high quality-rocker da hannunsa, shi ne na karshe mataki - da zaben 'yan wasa. Don sauƙaƙe da dawo da sikẽli bugu a kan tsari rufe da sabulu-graphite bayani. Kafin ciko da siffar da gubar a cikin shi wajibi ne don saka madauki da hooks. Cire balancer ya zama ya shirya kawai bayan cikakken sanyaya kuma solidification gubar. Better simintin da aka samu idan siffar Preheat. Bugu da ari, akwai wani zanen na ƙãre balance in na musamman launuka.

Ka tuna cewa domin samun mai kyau balance nauyi a kan perch da hannuwansu, ka fenti su a cikin na musamman launuka. A mafi kyau daga gare su, perch, Rapala - BSR, Karanta Head. Wadannan launuka ne mallakar tajirai. Duk da haka, kome ya hana su yin irin wannan zanen a gida baits. Teetering a kan perch da hannuwansu, ko kuma wajen su catchability dogara ne akan hasashen da dabara na kamun kifi.

Bait ga Pike ya kamata a yi a cikin wannan launuka kamar yadda a kan perch. Tsawon dole ne game da tara santimita. Domin kamawa dole ne da farko sarrafa m balancers. A cikin rashi na koto sakamakon kamata a yi amfani ga sauran launuka ko karami. Saboda haka balancers ga Pike da hannuwansu ya kamata a sanya a cikin wani babban yawan daban-daban masu girma dabam da kuma launuka don experimentation.

Production balancer zuwa unhook

Domin yi gubar simintin unhook ball yin la'akari game da ɗaya da ɗari grams. Zobe zuwa da shi za a iya sanya daga spring waya uku millimeters lokacin farin ciki. Form ga low komowar ruwa zuwa unhook sanya daga lãka, ko plaster. Yana dole ne a rami domin zuba gubar da kuma mafita gas tururi. Unhooked daidaita hannuwansu kamata a sami wani high quality-surface, babu kumfa da sauran imperfections.

A cikin nau'i na waya zobe da aka sa saboda haka ta shimfida hanyar da cibiyar da ball. Ya kamata ya zama da sauki shige kan da kuma tafiyar da koto a ƙugiya. Lokacin da kifi ne mafi alhẽri a yi da dama daban-daban masu girma dabam to unhook. Domin su sauri maye a karshen igiyar acikin sarƙa sturdy carabiner.

Saboda haka, domin a unhooked daidaita hannuwansu da ikon kowane masunci.