Profiled C10: fasaha halaye, nauyi, size, aikace-aikace

Profiled C10 ne daya daga cikin mafi yadu amfani kayayyakin ga} ungiyoyin da kuma masana'antu yi. Da aka fi galvanized profile amfani a yi na mutum gidaje. High shahararsa abu ya same ba kawai saboda low cost idan aka kwatanta da analogues amma kuma saboda wani hade da lightness da ƙarfi, da sauƙi na shigarwa. Wannan ceton ba kawai a lokacin saye, amma kuma a cikin shiri tsari.

fanni na aikace-aikace

Daya daga cikin dalilan da high shahararsa na wanda yana da profiled C10 ne ta versatility. A kayan amfani a kusan dukkanin yankunan da gine: farfadowa daga cikin rufi bene, da gina prefabricated gine-gine da kuma Tsarin, frame, makaran bango kuma garkuwa Tsarin, fences, ceilings, kazalika da prefabricated sanwic bangarori.

Idan dole, stacking C10 matsayin yin rufi bene kamata da farko tsara akwaku, cikinsa da farar tsakanin abubuwa ne 0.5 mita (amma ba fiye da 0.8). Wannan nuna alama ne dacewa ga rufi tare da babban kwana na son. C10 an yi profiled da gwamnatin nagartacce 52246-2004 F yin amfani da sanyi-birgima karfe, wanda aka kiyaye shi ta wani zafi tutiya shafi. A mafi girma shahararsa tsiwirwirinsu C10 tare da wani polymer shafi. Ado m Layer da ke sa kayan m, a bayyanar da qara rai na profiled takardar. A sayarwa za a iya gani profiled lamba C10 guda-gefe mai rufi, cikinsa da ciki gefen ne amfani da musamman varnish. Takardar da biyu mai gefe sputtering da ake amfani da shiri na fences, wanda damar domin wannan ado wasan zorro a garesu. A Stores sayar profiled C10 daga wasu masana'antun, wanda yana da curly irin zane da aka yi nufi ga gina fences gidaje.

fasaha halaye

Idan kana so ka zabi da hakkin kaya, ya kamata ka kula da lambobin da aka jera gaba da lakabin. A matsayin misali, za ka iya amfani da S10-1000-0.6 nadi, daga abin da ka san cewa kafin ka bango takardar da firam tsawo na 10 mm. Amfani yanar gizo nisa na 1100 mm, da kuma ƙarfe kauri daidai da 0.6 mm. Modern masu amfani da ana kiran su zuwa sayan kayan labeled S10-1000-0.5 S10-1000-0,7 da trapezoidal takardar. Origin of ce takardar yana da wani kauri daga 0.5 mm, yayin da kauri da na biyu - 0.7 mm. Daya murabba'in mita na a profile farantin karami kauri weighs 4.6 kg amma 0.7 mm takardar Tã 6,33 kg.

Ko da yake bambanci a kauri tsakanin jinsunan abu ne negligible (na biyu yin la'akari 1,73 kg fiye da na farko), shi qara load a kan tsarin, musamman ga ya fi girma masu girma dabam na yin rufi. Saboda haka, yin profiled C10, dole ne ka lissafi da yankin na rufin, wanda za a shafa ta snow kaya halayyar ga wani takamaiman yankin. The girma na takardar ne daban-daban a fadin na asali blank. Wannan siga za a iya saita zuwa 1000, 1100 ko 1250 mm. Akwai kuma wani amfani fadin abin da yake daidai to 900, 1000 da kuma 1100 mm.

Weight da kayan dangane da kauri

Profiled C10 wanda nauyi dabam dangane da kauri, yawa ya zama daidai da 7800 kg cubic mita.

• Daya mita kayayyakin za ku auna nauyi 4,45 kg, idan takardar kauri ne 0.4 mm. Kamar wancan ne da murabba'in mita za su 4 kg.
• By kara da kauri zuwa 0,45 mm da nauyi ne daidai 4.05 kg m ² da kuma 4,78 kg f / m.
• A takardar kauri daga 0.5 mm bada nauyi daidai da 4.6 kg m ² da kuma 5.4 kg mita.
• A samfurin na 0,55 mm yana da wadannan halaye: m ² - 5.4 kg, kuma n / m weighs 5.9 kg.
• Tare da kadan karuwa a kauri zuwa 0.6 mm da mita daga samfurin za ku auna nauyi 6.4 kg da square - 5, 83 kg.
• Sheet 0.7 mm yana da wani nauyi na 6,33 kilo da murabba'in mita, da kuma nauyin da n / m ne 7.4 kg.

ƙarin fasali

Profiled karfe takardar yana da wani rigidity da ƙarfi, wanda aka samu saboda wani zurfin 10 mm corrugation. Wannan ba ka damar amfani da yanar gizo don gine-gine da kuma Tsarin high mawuyaci. The abu ne resistant zuwa lalata da polymer shafi qara dadewa aiki. A takardar profile bambanta yadda ya dace, da kuma juriya da duk wani sauyin yanayi. Ba tare da shafi za a iya amfani da yi na formwork zuwa zuba kankare tushe. By sayen profiled C10 bayani dalla-dalla cewa tilasta masu amfani da su yi zabi a cikin shugabanci, za ka samu to sake amfani da zane don ajiye kudi. Material siffofi da sauki kafuwa, kawai yanka da ya fadi na sukar, wanda facilitates aikin na shigarwa teams.

kudin na

Profiled C10, farashin wanda zai bambanta dangane da kauri, aka kawota tare da wani galvanized da kuma rufi.

• A cikin farko idan da samfurin na karami nisa (4 mm) za kudin 196 rubles. da mita.
• Tare da kara kauri daga 0.5 mm farashin ƙaruwa zuwa 229 rubles. ga n / m.
• Idan kana sha'awar kauri daga 0,55 da kuma 0.7 mm, da kowace mita na wadannan kayan za su biya 249 da kuma 307 rubles. bi da bi.
• Farashin karuwa idan corrugated takardar yana da wani polymeric shafi. Ta hanyar sayar da wannan abu ya gabatar 'yan embodiments - 0.4 mm, da kuma 0.5 da kuma 0.7 mm. A farkon yanayin, da kudin ne 228 rubles. ga n / m. Ga takardar thicknesses 0.5 mm biya 268 rubles. A da mita semimillimetrovogo sheeting - 368 rubles.

Features na aikace-aikace na corrugated hukumar

Corrugated baƙin ƙarfe za a iya sanya a kusan duk wani rufin. A nesa tsakanin rafters dole ne daidaita da iyaka na 600 zuwa 900 mm. Tsakanin wani yin rufi zanen gado ake gyarawa da rivets, kuma ga kwanciya a kan rufin kamata a shirya yin rufi sukurori. Domin wadannan pre-naushi. Idan sayarwa ne ba zai yiwu a sami wani dace gini hardware ya dafa, da sukurori iya maye gurbin sukurori da heksagon kai. Ya kamata zabi fasteners da roba ko roba wanki. Idan ka shawarta zaka yi amfani da karshen wani zaɓi, pre-shigarwa na fasteners a wuri bukatar rawar soja ramukan, da diamita daga wanda dole ne mafi girma daga 0.5 mm sukurori. Corrugated baƙin ƙarfe shigar a kan rufin tare da kusoshi unacceptable. Wannan fasahar ba samar domin sauki dalilin cewa a ƙarƙashin rinjayar iska kusoshi ba za su iya rike da takardar. Sukurori da sukurori dole ne a saka tsaye, wanda ya hana yayyo na ruwa.

gwani shawara karfafa zanen gado

corrugated zanen gado suna shigar a kan akwaku kuma kulle a wuraren fit kalaman. Da murabba'in mita bukatar game 8 fasteners. Ya kamata kokarin samun da nisa tsakanin su shi ne wannan. A farko da kuma karshe akwaku zanen gado suna a haɗe zuwa kowane zango yankin, tun data yankunan da za su faru manyan iska load. Domin matsakaici lathing Dutsen sheeting sanya ta cikin naúrar. A tsaye gidajen abinci na farar tsakanin kayyade na'urorin haɗi dole ba zama mafi girma fiye da 500 mm.

muhimmanci nuances

corrugated takardar iya suya a kan daya daga cikin biyu data kasance hanyoyin. A farko ya shafi cikin tsaye matsayi na masana'anta, yayin da na biyu - halittar wani gungu na uku zanen gado. Tsaye stacking da ake amfani da kayayyakin da ciwon magudanun tsagi. Na farko, shi ya yi daidai da 1st takardar, wadda ake gyarawa dan lokaci, aka located bayan na farko da takardar da 2nd jere. Wadannan ne na biyu yanar gizo na 1st jere. Bugu da ari, ya kamata tsayar da 2nd takardar na biyu jerin. Wannan zai samu wani gungu na hudu canvases, kowanne daga abin da ya kamata a hada kai da kuma gyarawa har abada.

Idan kana so ka ƙarfafa a takardar a kan garu, sa'an nan wajibi ne a yi amfani da wani karfe jagora profile. Da farko, saita tsaye bayanan martaba, waxanda suke da zama dole a gyara pre-taurare sashi, da kuma tsakanin su ya kamata a haɗe kwance gadoji. Su wuri ya zama m. By lokacin shirya frame yi iya fara hawa bango sheeting, aiwatar da shi tare da taimakon sukurori.