Ganiya zuwa jackhammer: Siffar, iri, fasali da kuma sake dubawa

Tun zamanin da, a cikin shakka daga ta kasuwanci ayyuka ga mutãne, sau da yawa ya yi amfani da karfi kayan kamar sedimentary dutse, kwalta da kankare. Experience ya nuna cewa suna da wuya sosai raba ko sassauta ba tare da ya dace kayan aiki. A warware wannan matsala ne fitowan da guduma, sanye take da musamman m tips.

Mene ne aiki manufa da "wasan"?

Jackhammer ne a manual inji kayan aiki da yin doke mataki na aiki part (karfe kurfi ko a spade) a farfajiya na daban-daban kayan. Aiki ta amfani da kayan aiki yakan mallaki inji. A cikin kololuwa zuwa jackhammer zuwa inji hasken dake fitowa, wanda aka aiko zuwa harbe-harben fil. Ya saita a tashin ta wajen musamman actuators. Ganiya zuwa jackhammer ne hõre da daukan hotuna a mita 16-25 Hz. Ka'idar aiki kunshi a sabon ko tsagawa daban-daban sawmills. Bayan samu daga dan wasan guduma bugun jini ganiya ga guduma ta wajen ta gudanar da sabon abu loosens ko tsãgewar ƙwãyar mafi wuya kayan.

inji ganiya

Exchangeable bututun ƙarfe ne mai sanda, wanda a da daya karshen da aka saka a cikin guduma. A saboda wannan dalili, da shiri na "wasan" da musamman jam'iyya, tare da taimakon wanda da m kam na nozzles. Shanks ya kasu kashi da dama iri. A kololuwa ga "baffles" suna sanye take da Shanks na cylindrical irin, dace da rushe guduma da kuma atomatik. Idan m bututun ƙarfe jam'iyya m tare da kayan aiki, za ka iya amfani da musamman adaftan - adaftan.

Na biyu karshen sanda ne Tapered aiki sashi, wanda ya yi aikin daban-daban ayyukan. Ko da kuwa da girman da sanda da kuma siffar ta aiki sassa, da kololuwa suna tasiri ga duk aikace-aikace. Amfani da m nozzles for guduma, za a iya Punch ramuka a cikin kankare, bulo, kankare da dutse saman na daban-daban masu girma dabam. Yi la'akari da matsayin da sake dubawa na masu, domin zamani mutumin aiki a kan kwanciya na ruwa bututu ne a gane ba tare da yin amfani da wadannan baits.

Kamfanonin - masana'antun

Ganiya samarwa ga jackhammers a Rasha Federation tsunduma a cikin wadannan kamfanoni:

• "Artmaks" LLC (Tomsk).
• "Avtospetsmash" OOO (Cherepovets).
• OOO "Ural Shuka na Pneumatic" (Zlatoust).
• LLC "Agate" (Saint-Petersburg).

Kadarorin giciye-sandan mirgina

Babban aiki, wanda yana da za'ayi domin zangarniya jackhammer, shi ne wani gajere da karfi a kan abu da za a bi. Wannan ne ɗauke shi zuwa lissafi a cikin fasahar da m kayan aikin. Hanya domin yi na nozzles ne a giciye-sandan mirgina. Aiki ne da cewa karfe billet ne hõre guda zafi, bayan da kafa kayayyakin. A qa'ida ta mirgina ne cewa irin ƙarfin lantarki generated a yarwa labarin bayan da zafi magani gaba ɗaya da homogeneously rarraba tare da zaruruwa.

A sakamakon haka, wannan hanya na samar da wani high quality kayan aiki da cewa ba shi da thermal iyaka. Saboda wannan fasahar ƙwarai minimizes thermal danniya a karfe. Saurã daga wani irin ƙarfin lantarki sa ta gasa da samfurin a cikin tsari na "mirgina" an shiryar tare karfe zaruruwa. Bugu da ƙari, domin ganiya jackhammer samar haka yana da wani manufa axis lissafi. Irin wannan sakamakon ba za a iya cimma idan ganiya zafi dabam, a sashi ko amfani da mahara zafi magani hawan keke.

Me ne a cikin samfurin axial lissafi?

Yi la'akari da matsayin da yawa reviews na masu canza kida, ganiya ga Rotary guduma dole ne dole da cikakken cibiyar line. Wannan umurni ne saboda gaskiyar cewa ƙãra ƙarfin lantarki, wanda adversely rinjayar da ƙarfi daga cikin kololuwa saboda high mita a cikin karfe bumps. Musamman bad shi ne ga wadanda kida, da samar da abin da aka ba tabbas zai su straightness.

Yadda za a zabi da ake so ganiya?

Kololuwa ga pneumatic guduma iya samar da high yawan aiki na aiki aiwatar a cikin taron cewa suna zaba bisa ga irin makircin ayyukansu. Don aiki da aka za'ayi ba kawai da sauri, amma ba tare da lalacewar da kayan aiki, yana da muhimmanci a yi la'akari da wata abu: da mai saye zai yi domin sanin abin da irin nasa ne da kayan aiki amfani, domin kowane model aka bayar m zuwa ganiya ga jackhammer. St. Petersburg ne 'yan masana'antun na wadannan kayayyakin. A mafi m kayan aikin a kasuwa a yau ne kayayyakin da "Promtehosnastka" manufacturer ciniki kamfanin. Wannan kamfanin samar da wadannan iri m nozzles:

• Nuna kololuwa. P-11 - to a jackhammer.
• P-31 - wani kurfi.
• P-41 - ruwa.

Ina yin amfani da wani nuna ganiya?

"Crowbar" - shi ne na biyu sunan saboda ta peculiar siffar ganiya samu wani jackhammer (MO). Price P-11 ne 125 rubles. Wannan bututun ƙarfe kuma amfani da pneumatic guduma (MOS jerin). Yin nuna kololuwa kamata a da za'ayi a yarda da duk bukatun da kuma matsayin na samarwa. Bututun ƙarfe P-11 shi ne na musamman zane: shi ne dimbin yawa kamar nuna hudu-gefe dala.

Yana amfani da wannan kayan aiki ga wadannan iri aiki:

• Halakar wuya coatings hanyoyi (kwalta).
• Loosening na daskararre ƙasa.
• Dismantling bulo da kuma kankare ganuwar.
• Aiki tare da kankara.

Karafa masana'antu ne ya fi kowa yanki a cikin abin da nozzles ana amfani.

samfurin Description

• A shank cylindrical irin.
• Shank tsawon shi ne 7 cm.
• Volume - 0,24 cm.
• Tsawon 320 mm na dukan samfurin.
• Don samar da zangarniya amfani da kayan aiki karfe sa 50.
• Weight kololuwa - 1.2 kg.
• A kasar - da manufacturer - Rasha.
• A kayan aiki zo tare da wani garanti na shekara guda.

Aikace-aikace P-41

Wannan irin bututun ƙarfe aka tsara kawai yin aiki tare da jackhammers. The aiki manufa na P-41 da aka takaice directed tasiri (buga) to mai ɗamfarar abu. Saboda musamman zane fasali da kuma samar da fasahar-ruwa kololuwa da high ƙarfi halaye.

A ra'ayi na masu wadannan kayayyakin, da sauyawa kayan aiki ne sosai tasiri ga wadannan ayyukan:

• Scraping ganuwar plaster.
• Yankan da kuma, kawar da daga cikin mutum qananan yanki segments a tubali da kwalta saman.
• Aiki tare da manyan yankunan na kankare matafiya.
• Tare da wannan bututun ƙarfe iya aiki tare da gefuna a kankare constructions.

halaye na

• P-41 shi ne tsayin 315 mm.
• Shank Length - 7 cm.
• Diamita - 0,24 cm.
• daukan hankali shi ne rabo 50-70 mm a tsawon.
• Shank irin - cylindrical.
• Weight kololuwa bai wuce 1.2 kg.
• U-8 - iri na karfe, wanda samar da wadannan kololuwa zuwa jackhammer.
• Samfurin farashin - 170 rubles.

A amfani da bayanin da samfurin P-31

Yi la'akari da matsayin da yawa mabukaci ratings, saboda lissafi sigogi cewa bambanta daga kurfi "Promtehosnastki" Bisa replaceable kayan aiki ne sosai dace aiki tare da wani abu kamar daskararre ƙasa, kankare da masonry. Amfani da R-31, zai iya karfi yadudduka da wuya saman.

• A samar da irin wannan kololuwa Masters m ingancin tsarin carbon karfe na 45, wanda aka hõre zafi magani. Ga wani bai wa alama suna dauke halayyar Properties ƙarfi ne, kuma fluidity. Nozzles sanya na karfe, sosai resistant zuwa daban-daban jiki tasirin.
• Easy yin aiki tare da kankare kayayyakin - wani inganci, wanda yana da wani ganiya ga jackhammer. "Promtehosnastka" - firma- manufacturer, wanda aka yadu a yi amfani da masana'antu tsari na ta bututun ƙarfe fasahar giciye-sandan mirgina. P-31 "kurfi" bada shawarar ga shafe tsawon amfani. Yi la'akari da matsayin da m feedback, ganiya, wannan shi ne matukar tasiri a cikin m aiki.
• The aiki surface yana da tsawon 3-5 cm.
• A tsawon cylindrical shank n - 31 ne 7 cm.
• Volume shank - 0,24 cm.
• A size daga cikin dukan samfurin ne 315 mm.
• Weight - 1.2 kg.

Amfani da wannan bututun ƙarfe bada shawarar a lõkacin da aiki tare da kankare da karfafa kankare Tsarin. Tare da taimakon da samfurin P-31 za a iya sauƙi yanka ta alkuki a daban-daban m kayan.

Extended version

A tsawon na kololuwa ne dauke da wani muhimmanci sosai samfurin siga. Ana rinjayar yadda zurfi ne cikin rami a cikin surface bayan aikace-aikace na bututun ƙarfe a cikin "karo".

Standard girma ganiya ba ya wuce 350 mm da kuma nauyi ne 1.2 kg. A kan kayan aiki kasuwar akwai ma wadanda ba misali ko elongated versions na kayayyakin kamar U-11 da kuma U-31. Alamun ana amfani da su su lakabtawa: P-11y da kuma P-31U. A cikin irin wannan kayan aikin m cylindrical shank girma kasance canzawa (7 cm) kuma lengthens da aiki part kanta. Saboda haka, a nuna ganiya elongate misali yana da tsawon 3000 mm. A wannan size, kuma yana da wadanda ba misali kurfi: P-31U. Feedback daga masu amfani da suka yi amfani da wadannan kayan, ne tabbatacce. Saboda da manyan size daga wadannan wadanda ba misali kayayyakin suna tasiri a kan aiki da mafi m wurare.

Yau, da yawa ciniki da kamfanoni, kwarewa a cikin yi na ganiya ga guduma, da kuma cika mutum umarni. Dangane da mabukaci fifiko, da replaceable bututun ƙarfe iya sanya na steels samarwa da abokin ciniki.