Lacquer zafi-resistant ga fireplaces da stoves: iri, halaye

Za a iya yin ƙuƙuka da wutan lantarki daga nau'o'in kayan aiki. Amma don tsawanta rai da kuma adana bayyanar waɗannan sassan zasu taimaka magungunan zafi. Irin wannan rufi na gamawa ya kamata ya kasance da halayen wuta da halayen wuta.

Janar Bayani

Carnish yana da zafi, yana da magungunan wuta, - wani bayani wanda baya goyon bayan konewa. A cikin abun ciki ya ƙunshi resins silicone, diluted a cikin sauran ƙarfi. Yawanci sau da yawa yana da launi mai laushi, amma wasu lokuta an ƙaddara ƙazanta don samun samin da ake so.

Ana amfani dashi don sarrafa iri daban-daban, ciki har da tubali, dutse, karfe, yumbura, filastar. A wasu lokuta, ana amfani da su don ɗakunan kwasfa na katako. Carnish yana da zafi kuma yana ba da haske kuma yana kiyaye nauyin asali, launi. Kare kan wuta da lalata layin da ke fuskantar.

Don abin da ya wajaba don yin amfani da furna da wuta

A zazzabi a sama da 80 ° C akwai ƙaddamar da ƙura, yayin da aka saki abubuwa masu cutarwa. Don kula da tsabta da daidaita yanayin yanayi a cikin gine-gine, zane da zane-zane na amfani da su don taimakawa wajen kula da wutar lantarki da kuma matakan wuta. Ana kuma bada shawara don yin kayayyaki tare da siffofi na siffofi mai sauƙi, wanda zai hana jigilar ƙurar ƙura a cikin kinks. Wadannan matakan zasu taimaka wajen guje wa cutarwa, kuma suna taimakawa wajen kula da tsarin. Zai fi sauƙi don cire turɓaya da datti daga farfajiya. Bugu da kari, hadarin wuta ya rage.

Wajibi ne a yi la'akari da zaɓuɓɓukan don zabin.

Lacquer KO-85 - bayani na fasaha

Irin wannan bayani yana dogara ne akan polyphosphonium siloxane da polybutyl methacrylate resins. Wannan furen zafi yana da zafi kuma tana da amfani masu amfani:

• Zai yiwu a yi aiki a rage yanayin yanayi.
• Yana bada saman ya karu maɓuɓɓan ruwa ko da a lokacin da ake yin amfani da takarda daya.
• Tsayayya da yanayin zafi. A cikin tsari, fim ɗin mai kariya ba ya fashe, ba ya raguwa.
• Tsayayya da bambancin zazzabi daga -40 zuwa 300 ° C.
• An yi amfani dashi don yin aiki ba kawai makami ba kanta, amma har ma yana rufe, wanda ma ya hana lalata tsarin.
• Babban saurin bushewa - har zuwa minti 30. Ya danganta da yanayin muhalli. Yanayin da aka yi shawarar shine + 20 ° C.
• Tsayayya da radiation ultraviolet.
• Babban kyawawan kaddarorin. Ba a goyi bayan konewa ba.
• Durability, ya riƙe dukiyarsa har tsawon shekaru 20.
• Rashin ƙanshin wari. Bayan kammala bushewa, sun ɓace gaba daya.

Kamar yadda ake gani, laikin KO-85 yana da siffofin da ake buƙata don amfani da ita a cikin yanayin da ke ciki.

Lac-815 - bayani na fasaha

Wannan maganin ya dogara ne akan polyphenylsiloxane da resinshin glyptal. Bayan bushewa, yana da kaya iri iri kamar abun da ya gabata, amma yana da wasu bambance-bambance:

• Lokacin hardening daya Layer daga 30 zuwa minti 2 hours. Cikakken dajin ya auku bayan bayanan da aka yi a fili a zafin jiki na + 150 ° C.
• Yana resists mafi high zafin jiki aiki - to 350 ° C. Irin wannan kyamara mai zafi don furnaces ya dace da babu sauran. Har ila yau, suna iya rufe yankin tanderun, tun da yake yana da kwanciyar hankali mafi girma.
• Tsayayya da bambancin zazzabi daga -40 zuwa 350 ° C.
• Rayuwar sabis na waɗannan shararru har zuwa shekaru 15.

Wasu daga cikin halaye sun canza don mafi kyau. Wasu fasalulluka suna da rigima, kamar lokaci mafi wuya.

Silicone Enamel

A zuciyar waɗannan kudade suna lacquer-85 ko 815, amma tare da ƙarin aluminum foda. Idan aka ba da halaye, zai yiwu a ƙayyadad da amfanin da waɗannan ƙirar suna da:

• Tsayayya da matsanancin zazzabi mai sauƙi. Tsayayya har zuwa 60 ° C.
• Ruwa na ruwa, wanda yake da mahimmanci a cikin varnishes yana da ma'ana.
• Tsayayya da yanayin m. Kada ka canza launi a ƙarƙashin rinjayar radiation ultraviolet.
• Babban launi na launuka.
• Za'a iya amfani dashi a cikin iyaka daga -20 zuwa + 40 ° C.
• High anti-corrosion Properties.

Kamar yadda kake gani, kwayar halitta organosilicon tana riƙe da dukkanin kyawawan kayan haɓaka na asali. Saboda haka, irin wannan gaurayawan sun sami aikace-aikace mai zurfi a masana'antu da kuma na masu zaman kansu. Mafi sau da yawa ana amfani da su don ayyukan waje. Idan an yi amfani da shi a cikin sararin samaniya, dole ne a bayar da kariya ta jiki.

Aikace-aikace

Ana amfani da kowane katako na kwayoyin kayan aiki don rufe farfajiyar wuta da wuta a wuraren zama, da kuma a wanka, saunas. Bugu da ƙari, ana iya amfani dashi don tsalle-tsalle, barbecue. Wannan yana ba da damar samar da ruwan sha da kuma halayen irin waɗannan samfurori. Bugu da ƙari, ana yin amfani da suturar da aka kwatanta don aikin waje, saboda suna da tsayayya ga radiation ultraviolet, kuma a lokaci guda basu ji tsoron hawan kai tsaye.

Kodayake irin wannan kyamarar ga murhu da murhu an tsara shi azaman zaɓi don na waje da ado na ciki, ana amfani da shi don wasu abubuwa. Wannan itace, plaster, kankare, dutse. Ya kamata a lura cewa irin waɗannan abubuwa sun kasance a matsayinsu a matsayin katako mai zafi don karfe. Suna kare kariya daga lalata. Saboda haka, sau da yawa sukan rufe sassa na furnaces da fireplaces.

Ana amfani da waɗannan maganin a matsayin haɓakawa a cikin alkyd, acrylic da sauran kayan aiki, wanda ya ba su wasu kwarewa, ciki har da juriya ga kafofin watsa lalata.

Anyi amfani da lacquer-85 mai mahimmanci azaman tushe don sauke-nauyin KO-814 enamel. Kuma samfurin tare da martaba 815 shine tushen kullun 823 mai rikitarwa. Ana amfani da waɗannan maganganu da kayan aikin su a aikin sarrafa man fetur, na'urori na na'ura, sassa na mota da ke aiki a yanayin zafi mai girma.

Fasaha na aiki

Ya kamata a fahimci cewa, kamar yadda aka yi a kowane fanni, an riga an shirya surface kafin rufewa. A hankali tsabtace daga ƙazanta, ƙura. Ƙananan sassa an rushe. Ana ba da shawara cewa a yi amfani da substrate kafin a gama gashi. Kusa, shirya fenti don aikace-aikace. Ginin gabar jiki yana da matukar haɗuwa har lokacin da aka samu kumfa. Ayyukan aiki na iya yin aiki da goga, abin nadi, fashewar pneumatic.

Ana amfani da layin farko. An bada lokacin yin bushewa. A cikin shari'ar lacquer-85, kuna buƙatar jira 20-30 minutes. Don zane tare da alamar 815, lokaci mai tsawo daga 30 zuwa 2 hours, dangane da yanayin zazzabi. An bada shawarar yin amfani har zuwa 3 layers. Ya kamata a lura cewa lacquer-815 yana da mahimmanci a zafin jiki na 150 ° C, saboda haka zai zama dole a lissafi.

Fitaccen fina-finai na fim bai kamata ya wuce 40-50 microns ba. Idan wannan darajar ta wuce, akwai haɗarin fatattaka shafi.

Shawarwari don zaɓi

A gaskiya ma, kasuwar ba ta iyakance ne kawai ga mahadi da aka bayyana ba, akwai wasu. Alal misali, latex, acrylic, polymer. A lokacin da za a zabi wani bayani, dole ne a dauki bayanan waɗannan bayanai:

• Matsayin da abu, wanda shine batun aiki. Zai kasance cikin gida ko a waje. Kuma watakila sauna ko sauna. Dangane da wannan, wanda ya kamata ya kula da juriya, tsayayya da radiation ultraviolet.
• Yanayin da samfurin zai bi shine zane. Kula da layin haɓakaccen yanayin yanayin aiki.
• Gabatar da ƙanshi, zubar da hankali.
• Abubuwan da kake son karewa. Kula da adhesion ga mafita ga wannan ko wannan tushe. Kuna buƙatar saya samfurin farko wanda zai dace tare da maɓallin substrat da bayanin maganin.

Idan ka zaɓi fenti mai kyau, zai iya samar da kariya daga dogon lokaci daga wasu dalilai. Idan muna son yaduwar zafi, za mu iya cewa an gina su ne bisa ga GOSTs, saboda haka suna da wuta. Wannan yana daga cikin manyan halayen da ake buƙata don kammala wutar, wuta.

Sabili da haka, mun gano abin da kyamarar zafi yake.